带丁坝型半封闭矩形海湾中M_2分潮潮波和潮流特性分析     

钱学生  陈永平  张长宽 《海洋学报》2014,36(9):37-44

将黄渤海海域概化为矩形海湾,山东半岛概化为垂直于海岸的巨型丁坝,形成一个带丁坝型半封闭矩形海湾。利用DELFT3D-FLOW计算模块在上述海湾中进行了M2分潮数值模拟,对其无潮点和辐射状潮流场的特性进行了分析。研究发现:考虑科氏力影响和巨型丁坝反射作用,坝前形成了明显的无潮点,但在等水深条件下并未形成辐射状潮流场,而叠加上倾斜海底地形后其得以形成;无潮点和辐射状潮流场顶端位置受水深影响明显,随着平均水深的增大,无潮点将向湾口和湾中轴线方向偏移,而辐射状潮流场顶端则向湾口方向偏移。研究结果有助于加深对带丁坝型半封闭矩形海湾中驻潮波系统形成机制和动力特性的理解和认识。  相似文献   

Evolution of a deep-water lobe system in the Neogene trench-slope setting of the East Coast Basin,New Zealand: Lobe stratigraphy and architecture in a weakly confined basin configuration     

《Marine and Petroleum Geology》2014

  相似文献   

Cenozoic folding in the Cumuruxatiba basin,Brazil: An approach to the deformation trigger by the Abrolhos magmatism     

《Marine and Petroleum Geology》2014

The Cumuruxatiba basin is located in the central portion of the eastern Brazilian margin surrounded by Cenozoic magmatic highs that belong to the Abrolhos Magmatic Complex. This basin was formed by rifting, in the Neocomian followed by thermal subsidence during late Cretaceous like other basins along the Eastern Brazilian margin. In the Cenozoic, the Abrolhos magmatism took place as sills and dykes intruded the sedimentary section, primarily during the Paleogene. In that time, there was a strong NS contractional deformation in the basin represented by folds related to reverse faults coeval with Abrolhos magmatism activity. The structural restorations of regional 2D seismic sections revealed that most of the contractional deformation was concentrated at the beginning of the Cenozoic with maximum peak at the Eocene (up to 33% of total shortening and rate of 6 km/Ma). The Post-Eocene period was marked by a decrease in the strain rate that continues to the present day (around 4 km/Ma to less than 1). 3D structural modelling exhibited a major, well-developed E–W to NE–SW fold belt that accommodated most of the contractional Cenozoic deformation between Royal Charlotte and Sulphur Minerva magmatic highs. Volcanic eruptions and magmatic flows from the Abrolhos complex resulted in differential overburden on edge of the basin, acting as a trigger for halokinesis and the subsequent formation of fault-related folds. In general, such structures were developed close to adjacent magmatic highs, commonly exhibiting vergence towards the centre of the basin. Some magmatic features formed coeval with Cenozoic syn-deformation sediments clearly indicate that Abrolhos magmatism activity and contractional deformation development were associated. The study of the thickness variation of the syn-deformation section in relation to fault-related folds on deformation maps and maximum strain diagrams revealed that most folds were activated and re-activated several times during the Cenozoic without a systematic kinematic pattern. This lack of systematic deformation might be related to the variation of the magmatic pulse activity of adjacent magmatic highs resulting in a complex interference pattern of Cenozoic folds. These structural interpretations of the timing of fault-related folds that are potential Cenozoic traps in the Cumuruxatiba basin play a fundamental role in petroleum systems and exploration of low-risk hydrocarbon prospects.  相似文献   

Lacustrine basin unconventional resource plays: Key differences     

《Marine and Petroleum Geology》2014

There has been a revival in hydrocarbon source rock characterization and development associated with growing interest in unconventional resources, where these fine-grained organic-rich rocks act as both source and reservoir. To-date, the exploration focus on shale reservoirs has been largely on marine systems. Lacustrine source rocks for conventional resources are geographically important, dominating regions such as China, Indonesia, and Brazil's resource-base. However, they have been generally untested for unconventional resources.There are a number of key differences in the nature of these hydrocarbon systems that should be considered when assessing whether lacustrine systems may represent future unconventional opportunities in areas where the conventional resource-base is dominated by lacustrine-sourced oil. Among the key differences between these depositional systems is the greater sensitivity to high frequency climatic variability within lacustrine systems. Lacustrine systems are highly sensitive to changes in the balance between precipitation and evaporation, which may lead to rapid changes in lake level, potentially exceeding 600 m. These changes in depositional conditions are geologically rapid and may occur over periods of thousands of years. Such changes can reduce the areal extent of potentially thick source rock intervals to only those portions of a basin where a permanent deep lake was present. Thus the core unconventional target area may be geographically limited compared with their marine counterpart. Although potentially areally limited, a review of many lacustrine source rocks suggests that their thicknesses are often significantly greater than marine source rocks. An examination of the more distal portions of lacustrine systems, where better source rock potential is present reveals that there is generally limited connectivity between source and conventional reservoir. In these settings, such as the Wind River basin (Waltman Shale), the hydrocarbons remain trapped within the shales, potentially leading to over-pressured hydrocarbon charged systems. Such conditions suggest that although areally limited, viable unconventional targets may exist, if suitable reservoir conditions are present. Finally, the character of the oils produced is different in these settings, with lacustrine oils being waxy and displaying different hydrocarbon generation and cracking kinetics. High wax oils display distinct flow characteristics, being more viscous, and may offer different production challenges than their non-waxy marine equivalents. Additionally, differences in their cracking kinetics may indicate that the timing of gas generation for shale gas plays may differ significantly from marine systems.  相似文献   

3D architecture of Quaternary sediment along the NW Atlantic Moroccan Rharb continental shelf: A stratal pattern under the dual control of tectonics and climatic variations     

《Marine and Petroleum Geology》2014

This study focuses on the evolution of the Atlantic NW Moroccan Rharb continental shelf during the Neogene and Quaternary. This region is part of a foreland basin bounded by the Rif mountain belt and thus provides an interesting geological setting to study the interactions between eustasy and tectonics and the driving mechanisms controlling stratigraphic patterns. The results are supported by an interpretation of new data including high-resolution seismic lines coupled with an interpretation of industrial seismic lines and detailed logs of industrial wells completed by micropaleontologic analysis of cuttings. The stratigraphy reveals a succession of three mega sequences related to the transition from an underfilled to an overfilled stage reflecting the long-term evolution of the foreland system. Moreover, evidence of cyclical sea-level changes are visible in the upper megasequence composed of three depositional sequences assumed to be fourth-order sequences generated in response to the most recent 100-ka glacio–eustatic cycles. This study also shows the peripheral deformation of the Rharb shelf responsible for changes in the geometry of the deposits and thicknesses of the sedimentary fill during the Pliocene and Pleistocene. The most important change was triggered by the uplift of the Lallah Zahra Ridge corresponding to a major Quaternary kinematic boundary and the broad uplift of the southern shelf interpreted as a flexural uplift of the forebulge domain. The deformation-controlled sediment dispersal pattern consists of a progressive growth of the shelf accompanied with a progressive shift of depocenters from the North East to the South West and a general progradation to the North West along the southern border. This progressive filling has led to the confinement of the Rharb paleo-valley across the continental shelf. The complete filling of the palaeo-valley was followed by the development of a more than 70-m thick prodeltaic lobe at the front of the Oued Sebou river mouth during the Holocene.  相似文献   

Evaluating the mechanical compaction of quartzarenites: The importance of sorting (Llanos foreland basin,Colombia)     

《Marine and Petroleum Geology》2014

Mechanical compaction is the main porosity-reducing process in sandstones, including high-reservoir-quality rigid-grain sandstones. For such sandstones, the extrapolation of theoretical or experimental compaction algorithms needs calibration with rocks having well constrained burial histories. Evaluating the compaction of these rocks is achieved by comparing current intergranular volume (IGV) with depositional IGV, which is strongly dependent on sorting. However, because sandstone sorting is difficult to measure accurately, its impact on depositional porosity and compaction state is largely underestimated. We use the quartzarenites of the Oligocene Carbonera Formation in the subsurface of the hydrostatically-pressured Llanos basin to illustrate the importance of sorting when evaluating the compaction of rigid-grain sandstones. IGV and sorting were measured in core samples using a combination of transmitted-light and cathodoluminescence images, resulting in improved accuracy over standard procedures. The compaction state of clean quartzarenites at given depths is best described using IGV-versus-sorting plots, which are used to derive compaction curves for specified sorting values. The IGV-versus-sorting trends are displaced to lower IGV values with increasing burial depth. The differences in IGV caused by differences in sorting exceed the differences in IGV resulting from 1000 m of burial, illustrating the high impact of sorting when evaluating compaction. Contrasting with published experimental results, the compaction of the Llanos basin ductile-grain-poor quartzarenites is independent of grain size, and grain rearrangement is the main compaction mechanism during the first ∼1.6 km of burial. Based on the Llanos data, we have generated IGV-versus-depth curves for clean pure quartzarenites of specific sorting, which can be used to predict their maximum primary porosity up to moderate burial depths. Differences with other published burial curves are probably related to unaccounted variations in sorting, ductile-grain content and framework-strengthening cements. However, the Llanos basin quartzarenites contain virtually no cements, explaining their high degree of compaction relative to other rigid-grain sandstones, and making them ideal to isolate the effects of compaction on the IGV of quartzarenites. The Llanos basin data suggest that, below ∼2.5 km of depth, clean well- to moderately well sorted quartzarenites continue reducing their IGV by mechanical compaction below the 26% limit, which should apply only to extremely well sorted, rigid grain, uncemented sandstones.  相似文献   

Organic geochemistry of marine source rocks and pyrobitumen-containing reservoir rocks of the Sichuan Basin and neighbouring areas,SW China     

《Marine and Petroleum Geology》2014

Three bitumen fractions were obtained and systematically analysed for the terpane and sterane composition from 30 Paleozoic source rocks and 64 bitumen-containing reservoir rocks within the Upper Sinian, Lower Cambrian, Lower Silurian, Middle Carboniferous, Upper Permian and Lower Triassic strata in the Sichuan Basin and neighbouring areas, China. These bitumen fractions include extractable oils (bitumen I), oil-bearing fluid inclusions and/or closely associated components with the kerogen or pyrobitumen/mineral matrix, released during kerogen or pyrobitumen isolation and demineralization (bitumen II), and bound compounds within the kerogen or pyrobitumen released by confined pyrolysis (bitumen III). In addition, atomic H/C and O/C ratios and carbon isotopic compositions of kerogen and pyrobitumen from some of the samples were measured. Geochemical results and geological information suggest that: (1) in the Central Sichuan Basin, hydrocarbon gases in reservoirs within the fourth section of the Upper Sinian Dengying Formation were derived from both the Lower Cambrian and Upper Sinian source rocks; and (2) in the Eastern Sichuan Basin, hydrocarbon gases in Middle Carboniferous Huanglong Formation reservoirs were mainly derived from Lower Silurian source rocks, while those in Upper Permian and Lower Triassic reservoirs were mainly derived from both Upper Permian and Lower Silurian marine source rocks. For both the source and reservoir rocks, bitumen III fractions generally show relatively lower maturity near the peak oil generation stage, while the other two bitumen fractions show very high maturities based on terpane and sterane distributions. Tricyclic terpanes evolved from the distribution pattern C₂₀ < C₂₁ < C₂₃, through C₂₀ < C₂₁ > C₂₃, finally to C₂₀ > C₂₁ > C₂₃ during severe thermal stress. The concentration of C₃₀ diahopane in bitumen III (the bound components released from confined pyrolysis) is substantially lower than in the other two bitumen fractions for four terrigenous Upper Permian source rocks, demonstrating that this compound originated from free hopanoid precursors, rather than hopanoids bound to the kerogen.  相似文献   

因子分析在海河流域石油类污染综合评价中的应用(英文)     

戴媛媛  宋文平  郑德斌  汪笑宇  尚晓迪  王立平  马超  张阳  孙学亮 《海洋通报(英文版)》2014,(1)

基于因子分析对2012~2013年海河流域pH、DO、COD、BOD5、氨态氮和总石油烃等6项水质指标的监测数据进行统计,并对其中四项指标进行水污染综合指数评估,旨在对海河水质进行较为系统的评价。结果显示,BJ1和HB2两个站位水质属于Ⅳ类标准,其余各站位均为Ⅴ类;各站位综合评价结果得到海河流域指数为1.44,说明海河流域处于污染状态,其污染程度超过该流域功能区的标准。因子分析发现,COD、DO和NH3-N之间差异显著(P0.05);主成分分析显示,除pH和BOD5外,其余指标都在0.70以上;COD、DO、NH3-N和TPH的贡献率较高,其中总石油烃的贡献率为100%,因此可以认为该海域的污染类型属于有机污染,且石油烃污染较为突出。  相似文献   

大汶口盆地漕河崖矿段岩盐矿地质特征及岩相分布规律     

朱猛 《山东地质》2014,(11):24-27

通过对漕河崖矿段进行勘探工作,发现该区岩盐矿层赋存较多,矿层厚度在0．40～14．72 m,NaCl 平均品位86．39％,属厚度较稳定,品位均匀矿层;岩盐矿层不仅局限在 F2,F3,F43个断层的切割范围内,在 F3断层北部尚有岩盐层赋存。  相似文献   

Evolution of neotectonic activity of East Anatolian Fault System (EAFS) in Bingöl pull-apart basin,based on fractal dimension and morphometric indices     

《Journal of Asian Earth Sciences》2014

This study is an attempt of a semi-automatic geomorphological GIS analysis based on morphometric indices. In the study, 10-m-resolution Digital Elevation Models (DEMs) are used to assess the neotectonic signals regarding the recent topographic developments and to attach additional significance to active tectonics in the Bingöl basin area. The methodology incorporates the determination of the structural similarities of the faults in the basins using fractal concepts and the application of four morphometric indices (Stream Power Index (SP), Multi-resolution Index of Valley Bottom Flatness (MRVBF), Terrain Ruggedness Index (TRI) and Valley Width-to-Height Ratio (Vf)). In order to detect the deviation from spatial randomness of the applied indices, the weighted correlation coefficient Moran’s I is used and the results are interpreted at a confidence interval of 99%. The spatial distribution of integrated index values is evaluated with the tectonically active fault zones in order to determine the probable activity and the structural deformation in the basin.The applied methodology reveals that the fractal analysis of the fault lines and the spatial analysis of the morphometric indices proved to be effective tools in analyzing the tectonic influence of the fault system on the basin area. Within the basin area, a relatively lesser degree of tectonic activity is observed, in contrast with the high tectonic activity outside the basin.  相似文献